Keppel Verolme has completed the maintenance and refurbishment works on the world’s largest cruise ship, Oasis of the Seas.

The majestic vessel has already left Keppel Verolme.

Dry-Docking

Oasis of the Seas measures 362 metres in length, 65 metres in width and is more than 65 metres high. The vessel was dry-docked at Keppel Verolme on 30 September 2014, and the yard carried out several modifications to the vessel’s propulsion units, – three Azipod main propulsion units, as well as four bow thruster propellers.

In addition, the vessel’s two fin stabilisers were serviced and all eighteen lifeboats were inspected. The underwater part of the vessel was cleaned and coated with a new painting system, which helped to improve the vessel’s operating and fuel efficiency.

The most challenging scope was the replacement of one of the ship’s main engines. Keppel Verolme dry-docked the Oasis of the Seas on a 3.3 metre high dock-block arrangement, which enabled the yard to go under the vessel to remove the engine.  To install the new engine, the yard cut a hole in the double bottom. Subsequently, the 130 tonne-engine was lifted onto the ship.

Interior Works

To allow Royal Caribbean International (RCLL), the owner of Oasis of the Seas, to conduct the vessel’s interior works in a safe and just-in-time manner, Keppel Verolme provided RCCL and its contractors with a logistical infrastructure to facilitate the refurbishment and daily work. Over 200 containers with new furniture and materials for the refurbishment were brought on board and about 600 tonnes of waste materials were removed from the vessel.

Fines

Earlier this week, a spokesperson of the Dutch Inspectorate SZW confirmed fines will be imposed on the cruise ship's owner for violating Dutch employment law. This penalty could amount to € 600,000.

Picture: Oasis of the Seas (by Baldwin040 – Own work. Licensed under Creative Commons Attribution-Share Alike 3.0 via Wikimedia Commons).