Brazilian ship owning company CBO has assigned Rolls-Royce to equip an existing offshore platform supply vessel (PSV) with a new patented dual draglink (DDC) subsea crane. This will be the first installation of a subsea crane designed to be able to use either fibre or steel wire rope.

The delivery will take place in Q3 this year. It comprises a complete DDC crane system including the CTCU, cabin and control system. The hybrid DDC subsea crane will be installed on the vessel CBO Manoella, which is currently being retrofitted from PSV into a ROV Support Vessel (RSV). The active heave compensated crane is designed for continuous operation in a tough and corrosive offshore environment with focus on efficient and safe load handling.

 

Retrofitting

Marcelo Martins, technical director of CBO says: 'This is one of two vessels CBO is now retrofitting from PSVs to RSVs, and we are very satisfied about the flexibility of the crane from Rolls-Royce. A hybrid solution, with use of either fibre or wire, makes the vessel better prepared to take on a larger variety of future subsea tasks.'

The crane is a hybrid dual draglink crane with a lifting capacity of up to 50 tonnes and an operating depth of up to 3,000 metres. It will be equipped with wire rope when it embarks on its first subsea assignment off the coast of Brazil. The benefit of using a low weight fibre rope instead of steel wire is increased lifting capacity at large depths. The cable tractions control unit (CTCU) forms the crane winch and is located at the crane’s main boom.

This solution saves space compared to a solution where the CTCU unit is mounted below deck, and also makes it a better choice for retrofits. The horizontal elbow derrick movements provide Active Heave Compensation (AHC). This significantly reduces wear and build-up of heat in the lifting line compared to when the AHC is part of the winch. CBO Manoella has 76.7m overall length, a beam of 17m, and a gross tonnage of 2668 tonnes.