(With video) Thorn-D antifouling outperforms conventional antifouling coatings and is environmentally friendly. A pilot project which started 1.5 years ago, has proven that this new thin film coating performs better than traditional antifoulings.
The Dutch company Micanti, in cooperation with Damen Shipyards, launched a pilot project in the Port of Amsterdam in February 2013. Two virtually identical sister ships, two Damen Stan Tugs 1907, were treated with different coatings. The Castor was treated with a well-known conventional antifouling coating. The Pollux was treated with the new foil, Thorn-D. Both vessels operated at low speed in the Port of Amsterdam, under the same conditions and in the same waters.
Nylon Fibers
Thorn-D, a nylon fiber which acts as a physical barrier, does not require movement, and also works when a ship is moored. In addition, the product is one hundred per cent environmentally friendly. Regular antifouling coatings start degrading after six months when the toxins start to leach into the water. Because Thorn-D acts as a physical barrier against marine growth, it has a longer expected lifetime (guaranteed five years).
Drag Does Not Increase
Furthermore, the drag on Thorn-D has been tested at (Dutch) research institutes (TNO, Delft University of Technology and Marin) as well as in practice on operating vessels. The general conclusion is that Thorn-D fibers do not increase drag due to a change in the hydrodynamic flow structure, thereby not increasing fuel consumption.







