(With video) After the release of the Reefer RoRo Ship design in September last year, Knud E. Hansen has continued the development of the new Reefer RoRo Ship design, version II.
The ship is intended for world-wide operation as a Reefer RoRo Ship in the banana trade with spe-cial emphasis on a very low box rate by very fast and efficient cargo handling in port which enables slow steaming. The ship and its machinery have been designed in line with the highest environmental standards.
Version II Changes
To optimise cargo handling on the under deck areas, in version II the bridge and engine have been positioned forward of the ship. In addition, because there is a very large back haul cargo potential to Central America, Knud E. Hansen has increased the height of the four inside decks to 4.5 m to allow for general RoRo cargo. Hence, on the back haul, the ship is an ordinary RoRo ship.
Cargo Capacity
The ship has a capacity of about 12,500 HC pallets – 6800 HC pallets on cassettes inside the ship and another 5700 HC pallets in refrigerated containers on the weather deck. The ship can be load-ed, respectively discharged in twelve hours. On the back haul, the ship has 4400 lane metres, equivalent to about 900 – 1000 cars, but with the new design general project cargo can be trans-ported as well.
Loading in two ports in Central America and discharging in Antwerp plus one other port, and back haul to Central America, the ship is burning an average of 42 tons HFO per day. The box rate is calculated to $ 2.50 per banana carton full liner terms equivalent on a long term charter.
Below an animated view of the ship.







