IHC Offshore Systems, part of IHC Merwede, has been awarded a rental contract for the Noise Mitigation System NMS-6900. Dutch offshore contractor Seaway Heavy Lifting will operate the NMS-6900 during the installation of thirty monopile foundations for the Riffgat offshore wind farm off the north-west coast of Germany.
The contract has been signed by Mr. W. van der Velde, Chief Technical Officer of Seaway Heavy Lifting, and Mr. A.A. Kromhout, Managing Director of IHC Offshore Systems.
Site Assistance
The NMS-6900 is an addition to the existing rental fleet of IHC Merwede’s Hydrohammers, handling tools and piling templates. The contract includes site assistance throughout the whole project – IHC Offshore Systems service engineers will monitor all functions and support with the operation of the system. By June 2012 the NMS-6900 will be operational on location in the North Sea.
Noise Mitigation System
The purpose of the NMS-6900 is to reduce noise caused by offshore pile-driving activities carried out in the oil and gas and renewable energy sectors. Advanced technology developed within the IHC Merwede group reduces the negative effects of such noise on sea life.
The system consists of a double-wall steel screen capable of resisting harsh offshore conditions such as current and wave impact. A special guiding system has been incorporated to keep the monopile and NMS-6900 concentric. Variable glide pads enable safe guidance for a range of both straight and tapered pile sizes. Furthermore, an advanced multi-level bubble injector system has been installed, providing an additional noise barrier. A mud-mat flange at the bottom of the screen assures stable and safe positioning of the NMS-6900 on the seabed.
Continuous Monitoring
During its first commercial contract, IHC Offshore Systems will monitor the NMS- 6900 continuously to gain information required to further reduce noise levels. This not only contributes to a healthier sea life, but also paves the way for contractors to comply with noise level limits set by governments for the installation of many offshore wind farms planned up to 2020.
IHC Hydrohammer S1800 to Carry Out Piling
For the same project, IHC Hydrohammer has been awarded the contract for the provision of an S1800 hammer to carry out piling.