Final touches have been made to the Damen Walk 2 Work vessel, a completely new design for the offshore support vessel market. Damen has decided to start building the vessel on speculation.

The vessel will support and accommodate turbine maintenance crews at sea.

Features

The vessel is a monohull with bridge located amidships. It has a length of 90 m and a beam of 20 m. The WSV will feature 500 m2 of deck space, approximately 400 m2 internal storage space, a helicopter platform and a motion and heave compensating crane and gangway. Its shallow draft optimises comfort, while also conferring significant power savings.

The hull-form resulted in an average of 25 per cent less installed power to reach the same speed. When considering DP operations and power output, significant less thrusters output (twenty per cent) is required because of the positioning of the accommodation.

Damen also developed a fuel consumption tool in which total fuel consumption of the vessel in various operational conditions in a specific area can be calculated. This tool gives a good indication of what can be expected on a yearly basis given a certain operational profile.

Central North Sea Area

The Walk-to-Work WSV is especially designed for the North Sea. The vessel is capable of gaining access up to eighty per cent of the time in the worst case scenario in the central North Sea area.

Reduced Accelerations in the Accommodation

Due to the hull form and the positioning of the accommodation, crew and passenger comfort is increased. Damen has been able to reduce vertical and horizontal accelerations by up to thirty per cent in the accommodation.

Adding to the level of comfort are larger crew and turbine technician cabins as a result of  extensive ergonomic studies.

Transfer Positioning System

Being able to continue the work flow in the prevailing wind conditions and waves, forms the biggest challenge. The design questions are based on the selections of the components such as the access systems and the DP system, the positioning of these systems and a smart integration.

Characteristic for these systems for crew and cargo transfer on offshore vessels is that they operate independently of the DP control systems. This innovation, the Transfer Positioning System (TPS), aims to increase employability.