(With videos) Huisman is currently working on Subsea 7’s Seven Waves. The ship is docked at the Huisman Schiedam quayside to be equipped with a 550 mt Flex-lay system and a 400mt Offshore Mast Crane.
The vessel was built by IHC Offshore & Marine in Krimpen aan den IJssel.
Pipelines in 3000 m Water Depth
The 550mt Flex-lay system will be the highest capacity flex-lay system on board a pipelay vessel and is designed and built for the installation of flexible pipelines in 3000 m water depth.
Squeeze Control System
The tower is tiltable to allow connection of flexible risers to rigid pipelines, which are retrieved from the seabed. The system’s tensioners are retractable to allow for safe and efficient A&R and PLET installation procedures. They have been designed according to the most stringent requirements and are equipped with a Squeeze Control System which allows for accurate control of squeeze loads, also at low values. This is important when handling umbilicals.
Deepwater Crane
The 400 mt deepwater crane (up to 3000 m) is equipped with a deepwater lowering system and an active heave compensation system to counter-act the vessel’s heaving motion when landing a load on the seabed. These features will make it an efficient tool for the installation of heavy loads required for deepwater subsea production systems.
Particulars Seven Waves
- Type: 550 t pipelaying vessel
- Owner: Subsea 7
- Builder: IHC Offshore & Marine BV
- Length overall: 145.9 m
- Breadth moulded: 29.9 m
- Depth main deck: 13 m
- Draught (operational): 7.2 m
- Draught (max): 8.3 m
- Deadweight (operational): 7025 t
- Deadweight (max): 11,312 t
- Accommodation: 120 people
Picture: Impression of the Seven Waves (by Subsea 7)
Below two videos of the launch of the Seven Waves at IHC Merwede, Krimpen aan den IJssel. The first shows the launch as seen from the inside of the building hall, the second shows the launch as seen from outside.







