Scottish company Delta Marine and Damen have cooperated closely to develop a new type of Renewables Service Vessel (RSV), number 3315.
The first in the new series was officially christened Voe Vanguard at Damen Shipyards Hardinxveld by Miss Akira Mary Lumsden, the granddaughter of Bob Spanswick, managing director of Delta Marine Ltd. Just a week later Voe Vanguard was off to its first offshore wind farm, the Walney Extension project.
Tailored for renewables
David McNaugthan, Delta Marine General Manager, says the decision to invest in a vessel specifically tailored for renewables was taken around four years ago. The Damen RSV 3315 is based on the successful Multicat design. The vessel can undertake all duties normally expected of a Multicat but has the addition of a spacious, unobstructed deck, DP2 and dedicated 4-point mooring.
The 33 metre vessel has a 42-tonne bollard pull. David McNaugthan, Delta Marine general Manager says: ‘We were particularly interested in having a DP2 capability. This vessel is suitable for offshore wind but also for tidal projects, where he can stay in position using his DP in some pretty strong currents.'
Delta Marine and Damen adapted the traditional Multicat design by moving the wheelhouse forward and leaving the aft deck open. Additionally, it was important to make sure the vessel was under the 500-tonne mark to keep the costs down. ‘The vessel is diesel electric, and has four azimuths, with a large stern thruster. He is also very flexible, with a shallow draught of only 2.6 m. The two aft azimuths can swing up into the hull and we can easily switch from DP1 to DP2 mode,’ McNaugthan explains.







